Photo Mosaic Wall at Corporate Jet Investor Miami 2026: 989 Guest Photos, One Wall

A conference guest holds a small photo sticker up to a big black grid, checks the code printed on it, and presses it into its square. Around her, the letters MIAMI 2026 are slowly filling in, one guest photo at a time. By the end of the conference, there are 989 of them.
That was our photo mosaic wall for Corporate Jet Investor Miami 2026, sponsored by Air Charter Service, at the Fontainebleau Miami Beach. Over three days, every guest who stepped up to the photo booth added one tile, and by the end the tiles came together into one finished picture with the event and sponsor logos. If you're planning a photo mosaic for a conference, trade show or company event, here's how this one came together and what we'd tell any team planning one.
The brief: one wall the whole conference builds together
Corporate Jet Investor brings the private aviation and business jet world together, and Air Charter Service was the sponsor behind the photo experience. The goal was simple to say and a lot of work to pull off: give attendees a reason to stop, get their photo taken, and leave a mark on something bigger than one picture.
A photo booth alone gives every guest a photo. A photo mosaic gives them a photo and a spot in a shared artwork, so the wall gets more interesting every hour and people keep coming back to see how far it has come.
How the photo mosaic wall worked
Here's the flow guests went through:
- Get your photo taken in front of the Air Charter Service step and repeat.
- The tile prints on site. Each photo printed as a small sticker tile with the Corporate Jet Investor Miami 2026 branding and a column and row code, like "C24/R11".
- Find your square. The board was printed black with a white grid, and every square was labeled with the same column and row codes.
- Stick it on. Guests matched their code to the grid and placed their own tile.

That moment of hunting for "your" square is the best part. Guests came over in pairs and small groups, helped each other find their spots, and watched the logo take shape a little more with every tile.
The numbers behind the wall
The final mosaic was 43 columns by 23 rows: 989 tiles on a board about 86 inches wide by 46 inches tall. We sized the board to the largest panel our printer could produce, then set the tile grid to fit it exactly, so the finished image would line up edge to edge with no partial rows.
Each tile is a guest photo with a light color tint applied, so up close you see faces and from across the room you see the artwork. In the finished wall, the Corporate Jet Investor logo and MIAMI 2026 sit across the middle, with the Air Charter Service logo glowing underneath.

We timed the software for the length of the conference, so new tiles kept filling the wall over all three days. The target was a finished wall by midday on day three.
The step and repeat: where every tile started
Every tile on the wall started as a photo in front of the Air Charter Service step and repeat. Speakers, sponsors and attendees lined up in groups and on their own, and a black booth stand with the Air Charter Service logo stood next to the wall, so it was clear who was behind the experience.

Because every photo had the sponsor's logo behind it, the sponsor showed up twice: once in each guest's photo and once in big letters on the finished mosaic.
The finished mosaic
Here's the final mosaic file, built from every guest photo on the wall. After the event, the client gets the full-resolution mosaic file to use in their recap, on social media or framed in the office.

Planning a photo mosaic for a conference? 6 things to know
If you're an event organizer, sponsor or agency planning a photo mosaic wall in Miami or anywhere in South Florida, here's what we'd plan for.
1. Lock the artwork early
The mosaic image is the base everything else is built on. Your logo, your sponsor's logo and any text need to be final before the software can be set up and tested. For this event, the client's designer supplied the art, and we turned it into mockups and proofs they approved before we loaded anything.
2. Decide where the sponsor shows up
A mosaic gives a sponsor more than one place to appear: the backdrop behind every photo, the booth itself and the finished artwork. Plan all three together so they look like one experience.
3. Match the tile count to your crowd and schedule
More tiles mean a bigger, more detailed wall, and it also means more guest photos are needed to finish it. Think about your attendance and how many days the wall runs, and plan the size to match.
4. Plan the load-in route
Big convention resorts can have long routes from the loading dock to the room. For this event, the room was up an elevator, across a glass bridge and up a flight of stairs, so we mapped the route for our crew ahead of time and set up the evening before doors opened.
5. Give the wall a home with good light
Put the wall where people walk by often, with steady light and room to step back. The best mosaics keep pulling people back to check how much has filled in.
6. Plan what happens to the wall after
Ask for the finished digital file. A full-resolution mosaic is a ready-made recap image for your newsletter, social posts and sponsor report.
Questions to ask any photo mosaic vendor
Before you book, ask:
- Who builds the mosaic image, and do I approve it first? You should see a proof of the finished artwork before the event.
- Do tiles print on site? Guests should walk away from the booth with their tile in hand.
- How do guests find their spot? A clear grid with labeled squares keeps the line moving.
- What happens if a tile needs a reprint? Ask how they handle a misprint or a repeat photo.
- Do I get the final file? Make sure the full-resolution mosaic is part of the delivery.
- Who's on site, and who do I call? You want one person who knows the plan.
Why event teams bring SnapJoy in
We're a South Florida photo booth company with more than 700 events behind us, and photo mosaics are one of our favorite things to build for conferences and corporate events. Every booking gets an in-house designer and a technical event coordinator who stays with you from planning through the last tile. What you approve is what shows up, the setup is done on time, and your coordinator is reachable from start to finish.
We've also built activations for Shopify on a yacht in Miami, Jack Daniel's and Goya, and the photo booth at Hulu's Vacation Friends 2 premiere. See our photo mosaic experience, our corporate event work or more brand activations.
Planning a conference or corporate event in South Florida?
Tell us about your event, your sponsors and how many days you're running, and we'll come back with ideas for a mosaic your attendees will want to be part of. Reach out to the SnapJoy team and let's build your wall.
Frequently Asked Questions
Guests get their photo taken, and each photo prints on site as a small sticker tile with a column and row code. Guests match the code to a labeled grid on the board and place their tile. As the tiles fill in, they form one large image, like your logo.
It depends on the size of the wall. Our Corporate Jet Investor Miami 2026 mosaic was 43 columns by 23 rows, or 989 tiles. We size the grid to your attendance and how many days the wall runs.
Yes. For Corporate Jet Investor Miami 2026, the Air Charter Service logo was built into the finished mosaic and printed on the step and repeat behind every guest photo.
Yes. After the event you get the full-resolution mosaic file to use in recaps, social posts and sponsor reports.
SnapJoy serves all of South Florida, including Miami, Miami Beach, Fort Lauderdale, Boca Raton and Palm Beach. Reach out about events outside the area.


